Hi,
If you do not see a Contents Menu on the left side of this page, Please click HERE for this site to load properly.
Thank you for visiting my S10 conversion site.

Motor to 4 speed Transmission Adaptor"

I ordered the adaptor kit from Canadian Electric Vehicles Ltd.


EXCELLENT QUALITY! Well worth the $$
I wish the S10 Adaptor Kit had came with some installation instructions, even though it looks straight forward enough.

Sept. 20, 2007

Sept 26, to Sept 28, 2007

This is the parts made to attach the motor to Transmission. The 32 LB. Flywheel, clutch and cover turns into a 6 LB unit!
Shedding 26 LBS, every 7 LBS of weight the motor turns is equal to hauling 100 LBS of weight! (-371 LBS).

I just was not comfortable with the 5/16" bolts holding up to the torque of the Warp9 motor, so I drilled out the holes to accept 3/8" X 2.5" Grade 8, Cap Screws in the final assembly. With 3/8" "Nylock" nuts on the back.
I will add more pictures at final assm. install.

Next Warp9 Motor Installation and Forced Air Cooling